ARAV RX logo
JAEN

Safety

Safety is the first priority for ARAV RX. Remote and autonomous operation should protect operators and site workers while keeping the work productive.

Safety Initiatives

How ARAV approaches safety

A retrofit that can always be returned to manual operation, a system designed in-house from end to end, verification on real sites with Japanese authorities, and clear operating rules for autonomy. The on-machine stop systems are described on each model page and summarized below.

Model V/E: a patent-pending retrofit that can be removed at any time

Model V/E actuator installed in the cab

ARAV's Model V/E is installed without touching the hydraulic circuit, using an electrical connection and a patent-pending actuator mounting method. The machine can be returned to its original state at any time. Because nothing enters the hydraulic circuit, there is no risk of contamination and the machine keeps its original reliability.

If the system ever has a problem, an operator simply sits in the cab and runs the machine as usual. No modification work or mechanic is needed to switch back to manual operation, which protects your business continuity.

ARAV intellectual property

Registered (Japan)
  • Patent 7205965 — Lever-actuating machine and computer connected to it (cooperative link)
  • Patent 6877727 — Method for connecting terminals via a signaling server (MQTT × WebRTC)
  • Design registration 1711605 — Cover for electronic equipment (Model V cover)
  • Trademark 6408400 — ARAV
Main pending applications (Japan)
  • JP 2021-095391 — Lever-actuating machine (integrated electromechanical base)
  • JP 2021-189960 — Lever-actuating machine (serial link)
  • JP 2025-013717 — System for work machines (multi-LiDAR arrangement)
International applications (PCT)
  • PCT/JP2022/043086 — Lever-actuating machine (serial link; US national phase entered)
  • PCT/JP2025/026619 — Operating-lever drive unit

Designed and built in-house, from design to manufacturing

ARAV hardware

ARAV designs all of the hardware and software itself.

Because we develop and operate most of the remote-operation system ourselves, from the product to day-to-day operation, we can respond quickly if something goes wrong.

System component
ARAVOthers
Cloud servers and communication platform
Remote-operation software (video display and operating UI)
―
On-machine control unit (remote and autonomous operation)
―
On-machine actuators and mounting
―
On-machine cameras and video streaming
―
On-machine emergency stop
―
Operator devices (controllers and joysticks)
―
Operator station
―
Maintenance and spare parts
―

* The comparison reflects general trends based on ARAV's own research. It does not cover or identify every other product, service or contract type. Please check each company's official information for their latest offerings.

Field verification with Japan's Ministry of Land, Infrastructure, Transport and Tourism (FY2024)

As part of the field verification of safety rules and functional requirements run by Japan's Ministry of Land, Infrastructure, Transport and Tourism (MLIT), ARAV carried out a demonstration on the safety of autonomous construction machinery and held a discussion with industry participants.

MLIT field verification at ARAV's test field

Purpose

To verify MLIT's “Safety Rules for Autonomous Construction Ver. 1.0” and to discuss the next version and functional requirements for machines.

What was tested

A hydraulic excavator fitted with ARAV's retrofit autonomous and remote-operation system “Model E” carried out excavation and dump truck loading in a mixed area, to verify the safety measures.

Equipment

  • ・0.7 m³ hydraulic excavator (CAT320) × 1
  • ・2 t dump truck (XZC600T) × 1
  • ・ARAV autonomous and remote-operation system for excavators × 1 set

Location

ARAV test field (Kashiwa, Chiba, Japan)

Method

The test field was divided into unmanned, mixed, controlled and manned areas. Once the 2 t dump truck entered and stopped at its position, the excavator dug and loaded soil, and the adequacy of the area separation was checked.

Area separation — 4 ZONES
Unmanned

No entry while machines are running.

Mixed

Manned dump truck with unmanned excavator. A monitor is assigned.

Controlled

Authorized personnel only.

Manned

Normal manned operation.

Result

For the mixed area (manned 2 t dump truck, unmanned excavator), the safety measures were an area monitor, a communication link (IP radios) and an emergency stop device. With the monitor watching directly and able to stop the machine immediately on any abnormality, it was confirmed that the risk of accidents can be reduced.

Press release (Japanese) →

Technology partner of the e-Kenki® Challenge remote-operation competition

e-Kenki Challenge

Since 2022, ARAV has supplied the remote-operation system for the e-Kenki® Challenge, a construction-machinery remote-operation competition organized by Japan's Transport Digital Business Council (TDBC). The competition brings together esports players, students and construction operators to promote the practical use of remote operation.

  • ・2022 pre-event (Roppongi, Tokyo → Otaki, Chiba)
  • ・2023 1st event
  • ・2024 2nd event (Roppongi → Chiba, approx. 50 km)
  • ・2025 3rd event at the Osaka Expo site (Osaka → Chiba, approx. 450 km)

One operator, several machines: how RX Pro is operated

RX Pro is designed for one operator to run several machines. ARAV provides it on the basis of the operating model below, which follows the interim report published in June 2026 by an expert panel of Japan's Ministry of Health, Labour and Welfare (MHLW) on safety in unmanned machine operation. Outside Japan, the rules of the country of operation also apply.

Remote operation: one person operates one machine at a time

Remote operation requires continuous attention, judgment and control, so, as with manned operation, one person operates only one machine at a time.

Autonomous operation: one person may supervise several machines

In autonomous operation, the human role is limited to monitoring the machines and stopping them in an emergency, so one person may supervise several machines in normal operation. The operator decides how many, based on the type of machine and the risks involved.

Switching from autonomous to remote: focus on that one machine

When the operator takes remote control of one machine, they must focus on that machine and cannot keep supervising the others. Supervision of the other machines is handed over to another person, or those machines are brought to a safe stop.

Separate modes, switched explicitly

Autonomous and remote operation are managed as separate modes and switched only by explicit human action. The current mode must be visible from outside the machine; RX shows it with the beacon light (red, yellow, green) and in the operating UI.

Source: MHLW, interim report of the expert panel on ensuring safety in unmanned machine operation (June 29, 2026), section 5 (1)-(4). Full text (PDF, Japanese) →

In Japan, ARAV also offers “Accident Compensation Pack for RX”, third-party liability cover for automated construction machinery developed with Mitsui Sumitomo Insurance. It is a Japanese insurance product; please ask us about insurance for sites in other countries.

ImportantDisclaimer

ARAV RX is supplied on the premise that the customer ensures safety at the work site. Final responsibility for site safety, including machine operation, site management, worker safety and emergency response, lies with the customer.

Compliance with government guidelines, standards, occupational safety laws and industry standards that apply where the machines are operated is the customer's responsibility. New regulations may require us to change or suspend the service without notice.

ARAV does not guarantee that customers meet these obligations and is not liable for damage arising from the customer's compliance status. For specific responsibilities and accident handling, please refer to the contract and to the FAQ (safety and responsibility).

Download the ARAV overview (PDF)

Evaluating ARAV RX for your site?

Contact us

Already using ARAV RX?

Contact us

Interested in becoming a distributor?

Partner program